Menachem Bamberger

2022

Direct Aging of B319 Al Alloy: Microstructure, Hardness, and Electrical Conductivity

Vandersluis, E., Ravindran, C. & Bamberger, M., Oct 2022, In: Journal of Materials Engineering and Performance. 31, 10, p. 8643-8654 12 p.

Research output: Contribution to journal › Article › peer-review

2021

Mechanisms affecting hardness and electrical conductivity in artificially-aged B319 aluminum alloy

Vandersluis, E., Ravindran, C. & Bamberger, M., 25 Jun 2021, In: Journal of Alloys and Compounds. 867, 159121.

Research output: Contribution to journal › Article › peer-review

9 Scopus citations

Microstructure and magnetic properties of Mn-Al-C permanent magnets produced by various techniques

Popov, V. V., MacCari, F., Radulov, I. A., Kovalevsky, A., Katz-Demyanetz, A. & Bamberger, M., 2021, In: Manufacturing Review. 8, 2021008.

Research output: Contribution to journal › Review article › peer-review

Open Access

8 Scopus citations

2020

Corrosion and Protection (Conversion Coating and Plasma Electrolytic Oxidation) of Ti₆Al₄V Processed by Powder Bed Fusion—Additive Manufacturing. EIS Study

Hazan, J. & Bamberger, M., 2020, TMS 2020 149th Annual Meeting and Exhibition Supplemental Proceedings. Peng, Z., Hwang, J-Y., Downey, J., Gregurek, D., Zhao, B., Yucel, O., Keskinkilic, E., Jiang, T., White, J. & Mahmoud, M. (eds.). p. 1317-1327 11 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Development of coated electrodes for welding of Super Duplex steel

Atia, L. & Bamberger, M., Jan 2020, In: Heliyon. 6, 1, e02907.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Scopus citations

High entropy Al0.5CrMoNbTa0.5 alloy: Additive manufacturing vs. casting vs. CALPHAD approval calculations

Katz-Demyanetz, A., Gorbachev, I. I., Eshed, E., Popov, V. V. . J., Popov, V. V. & Bamberger, M., Sep 2020, In: Materials Characterization. 167, 110505.

Research output: Contribution to journal › Article › peer-review

21 Scopus citations

In-situ characterization of the solution heat treatment of B319 aluminum alloy using x-ray diffraction and electron microscopy

Vandersluis, E., Andilab, B., Ravindran, C. & Bamberger, M., Sep 2020, In: Materials Characterization. 167, 110499.

Research output: Contribution to journal › Article › peer-review

8 Scopus citations

Quantitative microstructure study of melt-spun Mg₆₅Cu₂₅Y₁₀

Katz-Demyanetz, A., Bamberger, M. & Regev, M., Nov 2020, In: SN Applied Sciences. 2, 11, 1811.

Research output: Contribution to journal › Article › peer-review

Open Access

TEM and High Resolution TEM Investigation of Phase Formation in High Entropy Alloy AlCrFe₂Ni₂

Eshed, E., Abd El Majid, S., Bamberger, M. & Osovski, S., 27 Aug 2020, In: Frontiers in Materials. 7, 284.

Research output: Contribution to journal › Article › peer-review

Open Access

12 Scopus citations

The Detriment of Coherency Strains to the Electrical Conductivity of Naturally-Aged B319 Al Alloy

Vandersluis, E., Ravindran, C. & Bamberger, M., 1 Nov 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 11, p. 5923-5931 9 p.

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

2019

Influence of additional elements (Si, Ti and B) on the microstructure, mechanical properties and castability of aluminum alloys (A201)

Majid, S. A. E., Bamberger, M. & Katsman, A., 8 Oct 2019, In: IOP Conference Series: Materials Science and Engineering. 629, 1, 012001.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Production of net-shape Mn-Al permanent magnets by electron beam melting

Radulov, I. A., Popov, V. V., Koptyug, A., Maccari, F., Kovalevsky, A., Essel, S., Gassmann, J., Skokov, K. P. & Bamberger, M., Dec 2019, In: Additive Manufacturing. 30, 100787.

Research output: Contribution to journal › Article › peer-review

29 Scopus citations

Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend

Popov, V. V., Katz-Demyanetz, A., Koptyug, A. & Bamberger, M., Feb 2019, In: Heliyon. 5, 2, e01188.

Research output: Contribution to journal › Article › peer-review

Open Access

68 Scopus citations

2018

Effect of the hatching strategies on mechanical properties and microstructure of SEBM manufactured Ti-6Al-4V specimens

Popov, V. V., Katz-Demyanetz, A., Kovalevsky, A., Biletskiy, R., Strokin, E., Garkun, A. & Bamberger, M., Dec 2018, In: Letters on Materials. 8, 4, p. 468-472 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

11 Scopus citations

Heat transfer and phase formation through EBM 3D-printing of Ti-6Al-4V cylindrical parts

Popov, V., Katz-Demyanetz, A. & Bamberger, M., 2018, Diffusion in Materials DIMAT-2017 - 10th International Conference on Diffusion in Materials. Rabkin, E., Klinger, L., Novick-Cohen, A. & Frage, N. (eds.). Vol. 383. p. 190-195 6 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

17 Scopus citations

Influence of additional elements (Si, Ti and B) on the castability, corrosion and mechanical properties of A201 alloys

Abd El Majid, S., Bamberger, M. & Katsman, A., 2018, Light Metals 2018. Martin, O. (ed.). p. 259-265 7 p. (Minerals, Metals and Materials Series; vol. Part F4).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Laser plasma treatment of materials at nearly atmospheric pressures

Medres, B., Shepeleva, L., Kaplan, W. D. & Bamberger, M., 17 Oct 2018, ICALEO 1998 Volume 85d of Laser Materials Processing Surface Processing and Film Deposition, Edited by E. Beyer, X. Chen, and I. Miyamoto, pp.216-223, 1998..

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

The effect of powder recycling on the mechanical properties and microstructure of electron beam melted Ti-6Al-4 V specimens

Popov, V. V., Katz-Demyanetz, A., Garkun, A. & Bamberger, M., Aug 2018, In: Additive Manufacturing. 22, p. 834-843 10 p.

Research output: Contribution to journal › Article › peer-review

99 Scopus citations

The peculiarities of steels laser treatment with CrB2 and Ni2B powders

Medres, B., Shepeleva, L., Ryk, G., Dehm, G., Bamberger, M. & Kaplan, W. D., 17 Oct 2018, ICALEO 1998, D51 (1998);.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2017

Castability, Mechanical Properties and Microstructure of A201 Alloys with Additions of Si, Ti and B. SP17

Bamberger, M., Katsman, A. & Abd el majid, S., 2017, , Beaumont Estate, Old Windsor, UK .

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Manufacturing of aluminum metal matrix cast composites with carbon based additives for thermal management applications

Katz-Demyanetz, A., Squatrito, R., Todaro, I., Essel, S., Zeidler, H. & Bamberger, M., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). p. 909-914 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

2016

A Spinodal Decomposition Model for the Prediction of the Glass-Forming Ability of Ternary Mg Alloys

Eshed, E., Bamberger, M. & Katsman, A., 1 Jan 2016, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 1, p. 209-221 13 p.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Austempered Ductile Cast Iron: Composition, Treating, Simulation

Bamberger, M., 2016, Encyclopedia of Iron, Steel, and Their Alloys. p. 196-216 21 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

Diffusional decomposition and glass forming ability of solidifying ternary liquids

Eshed, E., Bamberger, M. & Katsman, A., 2016, In: MRS Advances. 1, 26, p. 1935-1940 6 p.

Research output: Contribution to journal › Article › peer-review

MAGNESIUM CASTINGS IN AERONAUTICS APPLICATIONS - SPECIAL REQUIREMENTS

Wendt, A., Weiss, K., Ben-Dov, A., Bamberger, M. & Bronfin, B., 1 Jan 2016, Essential Readings in Magnesium Technology. p. 65-69 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

3 Scopus citations

Microstructure and Phase Evolution in A201 Alloys With Additions of Silicon

El Majid, S. A., Bamberger, M. & Katsman, A., 7 Feb 2016, Light Metals 2016. p. 127-130 4 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

3 Scopus citations

2015

Microstructure and properties of aged vs. Crept Mg-AI-Zn-Sn alloys with additions of Nd and Ce

Vainberg, U., Avraham, S., Katsman, A. & Bamberger, M., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). p. 19-24 6 p. (Magnesium Technology; vol. 2015-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Overaged Samples and Growth of Eutectics Mg-6Gd-3.7Nd Based Alloys

Majid, S. A. E., Bamberger, M. & Katsman, A., 2015, In: Applied Mechanics and Materials. 764-765, p. 76-81 6 p.

Research output: Contribution to journal › Article › peer-review

2014

Comparison study of microstructure and phase evolution in Mg-Nd- and Mg-Gd-based alloys

Bamberger, M., Atiya, G., Khawaled, S. & Katsman, A., Jul 2014, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, 8, p. 3241-3253 13 p.

Research output: Contribution to journal › Article › peer-review

15 Scopus citations

Magnesium Castings in Aeronautics Applications - Special Requirements

Wendt, A., Weiss, K., Ben-Dov, A., Bamberger, M. & Bronfin, B., 3 Mar 2014, Essential Readings in Magnesium Technology. Vol. 9781118858943. p. 65-69 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

7 Scopus citations

Nucleation and growth of metastable phases in Mg-Nd, Mg-Gd and Mg-Gd-Nd based alloys

Abd El Majid, S., Atiya, G., Bamberger, M. & Katsman, A., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. p. 179-184 6 p. (Magnesium Technology).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Phase stability and glass-forming ability of Mg-based ternary alloys

Eshed, E., Bamberger, M. & Katsman, A., 2014, Materials Science and Technology Conference and Exhibition 2014, MS and T 2014. p. 1393-1400 8 p. (Materials Science and Technology Conference and Exhibition 2014, MS and T 2014; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Twin roll casting and rolling of new mg-wrought alloys for body protective safety equipment

Wendt, J., Bronfin, B., Stutz, L., Kurz, G., Schmitt, S., Bamberger, M. & Letzig, D., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). p. 534-536 3 p. (Materials Science Forum; vol. 783-786).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

2013

Aluminum/TPG metal matrix composite with improved thermal conductivity

Katz-Demyanetz, A., Safranchik, D., Zolotaryov, D., Eshed, E. & Bamberger, M., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. p. 1371-1377 7 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Development of non chromate conversion coatings on AZ31 alloy: Effect of nickel overcoat

Hazan, J. & Bamberger, M., 2013, Light Metals Technology 2013. p. 602-606 5 p. (Materials Science Forum; vol. 765).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Mechanisms of nucleation and growth of metastable phases in Mg-Gd and Mg-Gd-Nd alloys

Majid, S., Bamberger, M. & Katsman, A., 2013, In: Nano Studies. p. 41-48 8 p.

Research output: Contribution to journal › Article

Microstructural characterization of metastable phases in homogenised and aged Mg-Nd and Mg-Gd-Nd alloys containing Zn, Y and Zr

Khawaled, S., Bamberger, M. & Katsman, A., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. p. 1123-1130 8 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Microstructure and phase evolution in Mg-Gd and Mg-Gd-Nd alloys with additions of Zn, Y and Zr

Khawaled, S., Bamberger, M. & Katsman, A., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. p. 357-361 5 p. (Magnesium Technology).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Plasma treatment casting of cast aluminium 6XXX wrought alloys

Bamberger, M. & Kiperwasser-Karbian, E., 2013, Light Metals Technology 2013. p. 200-204 5 p. (Materials Science Forum; vol. 765).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2012

Automated laser welding system

Medres, B., Kotliar, A., Sapozhnikov, E. & Bamberger, M., 2012, In: Lasers in Engineering. 23, 3-4, p. 209-219 11 p.

Research output: Contribution to journal › Article › peer-review

Microstructural characterization of homogenised and aged Mg-Gd-Nd-Zn-Y-Zr alloys

Khawaled, S., Bamberger, M. & Katsman, A., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. p. 465-468 4 p. (Magnesium Technology).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Vergleichende Untersuchungen zur Bestimmung des Austenitgehalts austenitisch-ferritischen Gusseisens mit Kugelgraphit (ADI)

Translated title of the contribution: Comparative Investigation on the determination of the austenite content in bainitic cast iron (ADI)Morgenbrodt, S., Spieß, L., Schaaf, P., Teichert, G. & Bamberger, M., 2012, HTM - Journal of Heat Treatment and Materials, 67, 6, p. 393-401 9 p.

Research output: Contribution to specialist publication › Article

1 Scopus citations

2011

Crystalline structure of metastable phases in Mg-Nd alloy containing Zn and Zr

Atiya, G., Bamberger, M. & Katsman, A., 2011, Light Metals Technology V. p. 218-221 4 p. (Materials Science Forum; vol. 690).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Grain refinement and mechanical properties enhancement of AZ91E alloy by addition of ceramic particles

Shepelev, D., Klempf, J., Bamberger, M. & Katsman, A., Sep 2011, In: Journal of Materials Science. 46, 17, p. 5798-5806 9 p.

Research output: Contribution to journal › Article › peer-review

14 Scopus citations

– Microstructure, phase Evolution and Strengthening Mechanism of Mg-3.1Nd-0.45Zr-0.25Zn Alloy

Bamberger, M., Katsman, A. & Atiya, G., 2011, Mg Technology 2011, W. H. Sillekens, S.R. Angew, N.R. Neelameggham, and S. N. Mathaudhu Editors, TMS 2011 annual meeting, San Diego, California, USA. p. 249-253

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Optimization of composition and heat treatment design of Mg-Sn-Zn alloys via the CALPHAD method

Avraham, S., Katsman, A. & Bamberger, M., Nov 2011, In: Journal of Materials Science. 46, 21, p. 6941-6951 11 p.

Research output: Contribution to journal › Article › peer-review

14 Scopus citations

2010

DC casting - Simulation and microstructure of Mg-Zn alloys

Harel, G., Bamberger, M., Rami, Y., Spigarelli, S., El Mehtedi, M. I. & Cupitò, G., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). p. 1518-1523 6 p. (Materials Science Forum; vol. 638-642).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

High temperature deformation of wrought Zn-containing magnesium alloys

Spigarelli, S., El Mehtedi, M., Ciccarelli, D., Bamberger, M., Cupitò, G. & Rami, Y., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). p. 1482-1487 6 p. (Materials Science Forum; vol. 638-642).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Influence of copper addition and temperature on the kinetics of austempering in ductile iron

Amran, Y., Katsman, A., Schaaf, P. & Bamberger, M., Oct 2010, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 41, 5, p. 1052-1058 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

22 Scopus citations

Laser surface alloying of 1045 AISI steel using Ni-CrB₂ powder

Klachuk, S. & Bamberger, M., 1 Sep 2010, In: Materials Science and Technology. 26, 9, p. 1059-1067 9 p.

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Menachem Bamberger

Research output

Search results